Tuesday, 26 March 2019

Antennas: Assignment 8

Common data for Questions 1 to 3: A circular MSA is designed at 1.8 GHz on a substrate having εr = 2.2 and h = 0.32 cm with dual feed as shown in Fig.1.



1. The approximate radius of the circular patch should be:
2. Approximate feed position should be x = y =
3. For left hand circular polarization, antenna feed amplitude and phase at x and y position should be:
Common data for Questions 4 to 6: A single feed nearly square MSA is designed at 2.5 GHz using a substrate having εr = 3.38 and h = 3.2 mm for right hand circular polarization (RHCP) as shown in Fig. 2. (Hint: To achieve RHCP for given feed point, L1 < L)



4. The dimension L1  of MSA should be:
5. The dimension L2  of MSA should be:
6. Gain of circularly polarized MSA will be:
7. Compared to conventional circularly polarized (CP) MSA array, sequentially rotated CP array provides:
(i) More gain (ii) High axial ratio bandwidth
(iii) Less axial ratio bandwidth (iv) Less gain
8. A series fed MSA array is designed at 5.8 GHz on substrate having e= 2.2 and h = 0.8 mm as shown in Fig. 3. To achieve broadside radiation pattern, approximate connecting feed line length should be:
9. A square MSA is designed at 1.8 GHz on RT Duroid 5870 substrate having er = 2.33, h = 1.6 mm, and tand = 0.0012. Side length of the square patch is 5.4 cm. An 11-elements central fed series array is designed with inter-element spacing of 0.65λo as shown in Fig. 4. Total array antenna length will be:
10. A square MSA has a gain of 6.2 dBi at 2.45 GHz. A 4 x 4 corporate fed array is designed using this square MSA. The approximate gain of this array will be:

Related Posts:

  • Antennas: Assignment 10: You can comment your answers or doubts below, we are leaving the bits which we have doubt and we will update shortly. In the meanwhile you can… Read More
  • Antennas: Assignment 12: Hope the answers we posted helped you all. Mistakes are quite common nature of every human, in-spite of thatwe tried to provide our best. Tha… Read More
  • Antennas: Assignment 3: 1. Directivity and input impedance of a monopole antenna on a large ground plane as compared to that of dipole antenna are:   Twice, T… Read More
  • Antennas: Assignment 11: 1. For a Yagi-Uda antenna, if number of directors keep on increasing then the gain of the antenna:  In… Read More
  • Antennas Assignment 1 Antenna Fundamentals    1)A cell tower antenna needs to cover an area with 120° angular coverage in horizontal plane. The ra… Read More

9 comments:

  1. is the options provided are correct.
    last week most of the answers were wrong

    ReplyDelete
  2. yes same question is here also

    ReplyDelete
  3. We try to give correct answers. Even we are also solving and putting answers. From this time onwards we will try to post earlier, so that if there are any doubts, you can raise query.

    ReplyDelete
  4. digital electronics assignment 8 wen will be posted

    ReplyDelete
  5. Due to some reasons we cant post digital assignment answers.

    ReplyDelete
  6. Solutions for Assignment no 9 please?

    ReplyDelete
  7. please provide antenna assignment 9 answers

    ReplyDelete
  8. Assignment 9 solutions please

    ReplyDelete
    Replies
    1. try to use u r brain. assign 9 is quite simple and intersting✌

      Delete